Side Mirror Turn Signal Tint Pre-cut Overlay compatible with 2025+ Toyota Camry

Side Mirror Turn Signal Tint Pre-cut Overlay For 2025+ Toyota Camry LE, SE, XSE, XLE Get ready to spice up your 2025+ Toyota Camry's side mirror turn signals with our pre-cut overlay! Let your car stand out with options of smoked, light smoke, JDM Yellow, Blue Smoke, Cherry Red, or Purple Smoke. Make your ride one-of-a-kind and ditch the boring look with a fun and easy customization. Specifications: Fitment: For 2025+ Toyota Camry LE/ Toyota Camry SE / Toyota Camry XSE / Toyota Camry XLE/ Toyota Camry Hybrid Side Mirror Turn Signal Pre-cut Overlay Tint High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability) Made with Durable High Gloss Material with Nano Air-Release topped with Embossed PET Liner  Easy Application (Peel and Stick) Comes in (4 PCS) in a Pair (Driver and Passenger Side Turn Signal Overlay Tints) ** NOTE ** Not a Turn Signal Side Mirror Replacement, This product is an overlay that sticks on / covers the existing clear portion of the turn signal on the Side Mirror. How to Install For Best Results Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee Rinse / Soap your Side Mirror Turn Signal to get rid of debris before application Peel off the Turn Signal overlay first Note: if you mess up placement, peel off the overlay with ease. DO NOT heat up the overlay until desired placement has been met. Each side has 2 pieces that need to be installed. First, install the smaller piece (trapezoid shape) that fits onto the flat portion near the turn signal's end. Align the trapezoid shape to the shape of the portion right after the curve. Make sure the pointed edge that points towards the front of the vehicle is aligned and the rest should fall into place. Next, align the wishbone shape piece by aligning the pointed edge to the light that points toward the middle of the car. Once aligned, pull the overlay along the curve and lay it flat till the two ends get to the trapezoid shape. Now, make sure you lay the two ends down, covering all clear portions of the turn signal and ensuring it lays ontop of the trapezoid. This will allow the pieces to adhere better and have a seamless coverage. Once aligned, the rest should fall into place - push out any bubbles to the closest edge. Once laid the rest of the overlay should fall into place. Lay the overlay and adjust until the desired placement is met. Please see the product photo for the exact placement of the side mirror turn signal overlay Once the placement is met, PLEASE FOLLOW BELOW INSTRUCTIONS FOR ADHESION If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness. NOTE: Light Smoke PET liner, must be peeled off after installation for a complete super gloss finish.