Raspberry Pi X820 V3.0 Expansion Board & Metal Case Supports 2.5-inch SATA HDD/SSD For Raspberry Pi 3 Model B+, 3B, 2B, B+
What do you need to use Raspberry Pi X820 V3.0 2.5 inch SATA Storage Board? A Raspberry Pi board(Pi 3B+, 3B, 2B, B+) A Raspberry PiX820 V3.0 SSD&HDD SATA Storage Board A DC5V 4A Power Supply A 2.5 inch SATA hard disk drives (HDD) or solid-state drive (SSD) AX820 V3.0 use match metal casekit(optional) Packing List: Bundle1： 1 x X820 V3.0 Expansion Board 1 x USB to Micro USB Power Cable 1 x USB connector 1 x 2 Pin Power Connection cable 1 x Install Screws pack 1 x X820 V3.0 Metal Case 1 x Cooling Fan 1 x Power Switch Bundle2：Bundle1 + DC 5V 4A Power supply(EU/UE/UK) If you need a US or UK power supply, please contact us. Bundle3：Bundle2 + X735 V2.5 Power management board Note: The raspberry pi and the 2.5" SSD are both not included. X820 V3.0 2.5 inch SATA Storage Board： Features: Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) Supports USB booting from your HDD/SSD On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket On-board XH2.54 connector and USB power socket to power other devices Ideal storage solution for Raspberry Pi USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac External Self-Powered or USB bus-powered LED red indicator indicates powered status and blue indicator indicates drive status Easy DIY with Raspberry Pi For Use With: Raspberry Pi 3 Model B+(plus) / 3B/2B Rock64(same dimesion as the raspberry pi) Thinker Board PC / Mac WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time. X735Power Management Board 1. There are 4 version of X735: V1.0, V2.0, V2.1, V2.5 (final version): Version 2.5(Updated on Mar. 15th, 2021): Some features: Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code. You must install shell script to enable the PWM fan work fine since it's a PWM fan, refer to X735 V2.5 Software Support TRUE AUTO ON function (in the old version,the power management function is disabled if AUTO ON is enabled) Considering that some customers use X735 together with other DAC shield, we adjusted the GPIO pins used. Please install shell script to get safe shutdown function. please refer to X735 V2.5 Software No any size changes. FAQ A: How to detect that the X735 v2.5 hardware is working fine? Q: DON'T insert the X735 V2.5 into the Pi 4 board, only power the X735 v2.5 alone, then press the on-board switch, fan rotation means hardware is ok. Intelligent and safe power management Equipped with both momentary button and latching switch for easy power control Press the momentary button or external momentary power switch to turn on Press the momentary button or external momentary power switch and hold for 1~2seconds to reboot Press the momentary button or external momentary power switch and hold for 3~7seconds to implement safe shutdown Press the momentary button or external momentary power switch and hold for more than 8 seconds to force shutdown Supports safe shutdown and full poweroff through software On-board switch convenient to select latching or momentary power control switches Press the latching power switch once to turn on and again to implement safe shutdown On-board LED shows the status of power on, reboot and shutdown On-board PH2.0 connectors allows to use external latching switch or momentary button Powers the Raspberry Pi via the 40-pin header - no additional cabling required Allows power input via DC jack or Micro-USB socket or XH2.54 connector Allows power output via XH2.54 socket and or the 40-pin header Auto cooling function Dual trip point temperature controlled cooling fan Auto-Control the fan for Cooling / quiet Operation Board temperature ≤34C - Fan running at low speed Board temperature ≥34C - Fan running at medium speed Board temperature ≥45C - Fan running at full speed On-board LEDs show the status of fan running low and high No driver and additional setting required for the cooling fan Others Reserved 40-pin stackable Header for Add-On Boards Works with all current models of the Raspberry Pi using a 40 pin header Fully compatible with our products X820, X850, X860, X870, X822, X852 to provide intelligent and safe power management Four kinds of power source:(DC5525, Micro USB, Type C, XH2.54 2-Pin cable) X820 V3.0 Metal Case: This is a metal case with a super quiet fan assembly, High quality with good lacquer. Easy to install, protect your X820 board and Raspberry pi board better. Updated GPIO/FFC Cable Side Slot on the case Updated Slot for X735 DC power Port and X735 microusb port Compatible with Raspberry Pi 3 Model B+(plus)/3B/2B/B+ Installation guide, please refer to: http://www.raspberrypiwiki.com/index.php/X820 Note: The Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch) Please remove the Jumber cap when you use the power swtich to control the power of raspberry pi and X820 storage board Installation guide：