Raspberry Pi X820 V3.0 Expansion Board Supports 4TB 2.5-inch SATA USB 3.0 For Raspberry Pi 3 Model B+, 3B, 2B, B+
What do you need to use Raspberry Pi X820 V3.0 2.5 inch SATA Storage Board? A Raspberry Pi board(Pi 3B+, 3B, 2B, B+) A Raspberry PiX820 V3.0 SSD&HDD SATA Storage Board A DC5V 4A Power Supply A 2.5 inch SATA hard disk drives (HDD) or solid-state drive (SSD) AX820 V3.0 use match metal casekit(optional) Packing List: Bundle1: 1 x X820 V3.0 Expansion Board 1 x USB to Micro USB Power Cable 1 x USB connector 1 x 2 Pin Power Connection cable 1 x Install Screws pack Bundle2: 1 x X820 V3.0 Expansion Board 1 x X820 V3.0 Metal Case 1 x Cooling Fan 1 x Power Switch Note: The raspberry pi and the 2.5" SSD are both not included. For Use With: Raspberry Pi 3 Model B+(plus) / 3B/2B Rock64(same dimesion as the raspberry pi) Thinker Board PC / Mac Features: Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) Supports USB booting from your HDD/SSD On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket On-board XH2.54 connector and USB power socket to power other devices Ideal storage solution for Raspberry Pi USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac External Self-Powered or USB bus-powered LED red indicator indicates powered status and blue indicator indicates drive status Easy DIY with Raspberry P Power Supply Unit: (Optional Accessories): AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output With 2 snap-in plugs for North America (US) and Europe (EU) DC Power Plug Size : 5.5*2.5m Specification: Power supply: 5Vdc +/-5% , 4A Ports & Connectors: DC jack - 5.5x2.5mm, USB socket - USB 3.0 type A, Power output connector - XH2.54 2-pin Power switch connector -PH2.0 4-pin PCB Size 107.5mm x 85mm The raspberry pi and the 2.5" SATA SSD are not included. WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time. How To Install: X820 V3.0 Metal Case: This is a metal case with a super quiet fan assembly, High quality with good lacquer. Easy to install, protect your X820 board and Raspberry pi board better. Updated GPIO/FFC Cable Side Slot on the case Updated Slot for X735 DC power Port and X735 microusb port Compatible with Raspberry Pi 3 Model B+(plus)/3B/2B/B+ Installation guide, please refer to: http://www.raspberrypiwiki.com/index.php/X820 Note: The Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch) Please remove the Jumber cap when you use the power swtich to control the power of raspberry pi and X820 storage board