Audix AP61L10, WIRELS,R61,BP, W/ADX10 LAV 522-586MHz, Combination R61 True Diversity Receiver and B60 Bodypack Transmitter with ADX10 Lavalier Microphone

Descriptions Audix AP61L10, WIRELS,R61,BP, W/ADX10 LAV 522-586MHz, Combination R61 True Diversity Receiver and B60 Bodypack Transmitter with ADX10 Lavalier Microphone The Audix AP61L10 features its professional true diversity lavalier wireless system featuring the Audix ADX10 cardioid miniature condenser microphone. The Audix ADX10 in Audix AP61L10 features its lightweight with low profile mic designed for lavalier applications such as speech, presentation and theatrical production. The Audix ADX10 has the ability to accurately capture and create vocals from a comfortable distance of 4-8 inches, the Audix ADX10 has a natural sound with exceptional response that is resistant to feedback and easy to use. Another best thing in Audix AP61L10 it has a single space rackmount kit with BNC cables for front mounting antennas is included. Optional accessories include rackmount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels). Audix AP61L10 Product Features R61 True Diversity Receiver- 64 MHz Wide spectrum tuning receiver- 207 Pre-coordinated frequencies for quick, easy and reliable set up- One-touch auto scan searches for clear channel- One-touch sync links transmitter to receiver via infrared beam- 2560 tunable frequencies B60 L10 Bodypack Transmitter- 64 MHz Wide spectrum transmitter with ADX10 lavalier- Durable metal housing- 14 Hour run time - AA batteries Specifications Audix R61 Kit Single-Channel Wireless True Diversity Receiver (522 To 586 MHz)<span> </span>Specs Frequency Band  522 to 586 MHz Bandwidth  64 MHz # Of Simultaneous Systems  Up to 24 Switchable Frequencies  207 pre-coordinated frequencies Reception Frequencies  2560 tunable frequencies (spaced 25 kHz apart) Wireless Range  Up to 450' / 137 m Antenna Connector  2 x BNC (8 VDC, 150 mA) Outputs  1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced Audio Output Level  XLR: -12 dBV at 25 kHz deviation, 600-Ohm   load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load,   +6 gain Audio Level Control  -12 to +9 dB in 3-dB steps Frequency Response  45 Hz to 18 kHz Compander  2:1 Pilot Tone  32 kHz Receiving System  Dual tuner, true diversity Signal to Noise Ratio  112 dB at 30 kHz deviation (A-weighted) Total Harmonic Distortion (THD)  <0.4% (33 kHz deviation at 1 kHz) Sensitivity  5 dBµV (S/N 60 dB at 25 kHz deviation, A-   weighted) Power Requirement  100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A Enclosure Material  Metal Dimensions (W x D x H)  8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm Weight  2.4 lb / 1.1 kg   Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs RF Power Output  10/30 mW Bandwidth  64 MHz Gain Adjustment  0 dB, -6 dB, -12 dB, -24 dB Inputs  1 x mini-XLR 3-pin Input Impedance  Mic: 10 kOhms Line: 1 MOhm Maximum SPL  Approximately 128 to 140 dB (depending on   microphone) Battery Life  Approximately 14 hours Current Consumption  110 mA typical Power Requirement  2 x AA 1.5 V batteries Dimensions (W x L x D)  2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm Weight  3 oz / 85 g without batteries Audix ADX10 Miniature Cardioid Condenser Lavalier Microphone<span> </span>Specs Transducer  Condenser Polar Pattern  Cardioid Frequency Response  50Hz to 18KHz Dynamic Range (Typical)  not specified by manufacturer Signal-to-Noise Ratio  not specified by manufacturer Maximum Input Sound Level  130dB Power Requirements  Audix Beltpack Transmitters or APS-910 Phantom   Power Supply (not included) Output Impedance  1000 ohms Output Connectors  Mini-XLR Pad  No Low Frequency Roll-Off  No Dimensions  not specified by manufacturer Weight  not specified by manufacturer