Happymodel Mobula6 Race HD 1S HDZero AIO5 ELRS 2.4GHz 65mm Ultra Light Micro FPV Whoop - BNF

The Happymodel Mobula6 Race HD BNF is the first 65mm HD brushless tiny whoop that weighs less than 19.4g. With tiny whoops, every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video! To keep weight and cost to a minimum, the Race HD BNF features the light weight HDZero Eco camera. The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for. In order to achieve the goal of extreme weight reduction, HAPPYMODEL used original Japanese RENY screws at all costs, and also designed a lighter 5.8G VTX antenna. All these improvements are to make this HD BNF weigh less than 20 grams. We hope you like it. Check out our collection of Micro BNF/RTF/PNP Whoops and the rest of our  Happymodel Products! Default factory dump file for betaflight 4.4.2 Mobula6 RACE HD dump file for BF4.4.2   Specifications: Weight: 19.3g Recommended Battery: 1S 300mAh with A30 or BT2.0 plug Propeller Size: 31mm AIO MCU: STM32F411 (100MHz, 512K Flash) Gyro: BMI270 On board voltage and amperage meters Built-in 5A(each) BLHeli_S 4-in-1 ESC Bluejay ESC firmware pre-installed Built-in 5.8G HDZero VTX Built-in SPI ExpressLRS 2.4GHz receiver compatible with expresslrs v3.0 Built-in 5V 1A BEC Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size Betaflight firmware: CRAZYBEEF4SX1280 4.4.2 out of factory HDZero Eco Camera Sensor size: 1/3 inch Resolution: 720p60 4:3 FOV: D:150° H:120° V:98° Motors      Kv:28000 Stator diameter: 7mm Stator length:2mm Shaft diameter: Φ1mm Weight:1.5g   Package Includes: 1 x Happymodel Mobula6 Race BNF 1 x Spare canopy 1 x Spare propeller(set) 1 x Screw driver 1 x propeller disassemble tool