TANNOY	CMS 603DC PI 6" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Pre-Install) (CMS 603DC PI)

TANNOY CMS 603DC PI 6" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Pre-Install) (CMS 603DC PI)

$249.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

TANNOY CMS 603DC PI 6" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Pre-Install) (CMS 603DC PI) The CMS 603DC PI stands as a full-bandwidth 320-watt high-sensitivity loudspeaker, integrating our cutting-edge Ceiling Monitor System technology (CMS 3.0). Equipped with an innovative 6" Dual Concentric point-source driver featuring Omnimagnet technology on a Torus Ogive Waveguide, this UL-certified speaker ensures expansive and uniform broadband directivity, notably improving intelligibility while delivering an exceptionally accurate and linear response. Optimized for Installation The CMS 603DC PI is thoughtfully engineered with a self-aligning 4-way clamp system, ensuring swift, straightforward, and cost-effective installation. Notably, it includes extra clamp extension to accommodate thicker ceiling panels and employs a locking design to prevent over-tightening. This model features a convenient front panel tap switch, controlling the 60 W transformer housed in the optional CMS 603 PI BACKCAN. It also includes a paintable powder-coated steel mesh grille providing dust protection, along with two tile support rails and a C-ring. Separate accessories available for this unit include an Arco™ style grille designed for complete concealment, a back can, and a plaster (mud) ring tailored for specific aesthetic preferences. LAB GRUPPEN Ready The CMS 603DC PI is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel. PRODUCT FEATURES Full range ceiling loudspeaker for installation applications 80 Watts continuous, 320 Watts peak power Next generation 6" Dual Concentric driver featuring Omnimagnet technology Torus Ogive waveguide for improved high frequency response and directivity Pre-install version supplied without back can (available separately) UL 1480 certified for general signalling systems UL 2043 certified for air-handling spaces Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input Low insertion loss 60 W line transformer with easily accessible tapping switch Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel Semi matt white finish fits unobtrusively in any environment Powder coated UV resistant perforated steel mesh grille with dust protection Removable magnetic grille for custom painting Optional ARCO designer grilles available for minimal architectural impact Self-aligning 4 way clamp mounting system Mounting C-ring and ceiling tile rails included Specifications Performance Frequency response (-3 dB) (1) BM Backcan 75 Hz - 30 kHz Frequency range (-10 dB) (1) BM Backcan 50 Hz - 30 kHz Frequency range (-10 dB) (1) PI Backcan 46 Hz - 30 kHz System sensitivity (1 W @ 1 m) (2) 91 dB (1 W = 4 V for 16 Ohms) Nominal coverage angle 90 degrees conical Coverage angle (1 kHz to 6 kHz) — Directivity factor (Q) — Directivity index (DI) — Power handling (3) Transducers Dual concentric point source driver 1 x 165 mm (6.5") Dual Concentricdriver, using Omnimagnet technology Low frequency 44 mm (1.75") voice coil, treatedmulti fiber paper pulp cone High frequency 25 mm (1.00") PEI dome Physical Enclosure Safety features Safety ring located at rear of enclosurefor load bearing safety bond CMS 603ICT LS UL 1480 UUMW certifi cation forLife Safety applications Clamping design Security toggle clamp Min / Maxclamping range 9.5 mm (0.37") /60 mm (2.36") Recommendedclamp torque: 1.5 Nm Backcan options Cable entry options Cable clamp & squeeze connector forconduit up to 22 mm Conduit knockouts on PI Backcan 3 Sets of horizontal positions19 / 22 / 28 mm (0.75" / 0.87" / 1.10") Connectors Removable locking connectorwith screw terminals with“loop through” facility Compliance UL-1480, UL-2043, CE Dimensions Net weight (ea) Included accessories C-Ring, tile-bridge kit, paint mask,cut-out template, grille Optional accessories Plaster (mud) ring, Arco grille Packed quantity 2

Show More Show Less