Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi (Global Band Support)
Description Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi (Global Band Support) Supports global NB-IoT, Cat-M, and GPRS bands Integrates seamlessly with Raspberry Pi boards Enables GNSS positioning with GPS, BeiDou, GLONASS, Galileo Includes onboard USB for testing and GPS data Provides comprehensive development resources The Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi (Global Band Support) is a sophisticated telecommunication module designed for Raspberry Pi. It supports a wide range of global bands for NB-IoT, Cat-M, and GPRS, along with GNSS positioning capabilities. This module is particularly advantageous for Internet of Things (IoT) applications due to its compact size, low latency, and extensive coverage, making it suitable for intelligent instruments, asset tracking, remote monitoring, and e-health applications. This HAT is built on the SIM7070G platform, offering enhanced versatility compared to similar models by supporting GPRS (2G) and global bands. It integrates seamlessly with Raspberry Pi series boards through a standard 40PIN GPIO extension header and supports various communication protocols, including TCP, UDP, HTTP, HTTPS, TLS, DTLS, PING, LWM2M, COAP, and MQTT. The GNSS positioning function is compatible with GPS, BeiDou, GLONASS, and Galileo satellite systems. The module includes an onboard USB interface for testing AT Commands and obtaining GPS positioning data. It features breakout UART control pins for connectivity with host boards like Arduino and STM32. The SIM card slot is designed for 1.8V SIM cards only, and the module is equipped with LED indicators to monitor operational status. It comes with comprehensive development resources and manuals for ease of integration and use. View more What's Included 1x Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi (Global Band Support) 1x LTE antenna 1x GPS external antenna (B) 1x USB-A to Micro-B cable 1x Standoffs pack Dimensions 30.50 x 65.00 mm Links Website SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support - Product Wiki Specifications Standard Raspberry Pi 40-pin GPIO extension header, compatible with Raspberry Pi series boards Supports communication protocols: TCP, UDP, HTTP, HTTPS, TLS, DTLS, PING, LWM2M, COAP, MQTT Supports GNSS positioning: GPS, BeiDou, GLONASS, Galileo Onboard USB interface for testing AT Commands and obtaining GPS positioning data Breakout UART control pins for connection with host boards like Arduino and STM32 SIM card slot supports only 1.8V SIM cards (3V SIM cards are not supported) Two LED indicators for easy monitoring of working status Baud rate: 300 to 3686400 bps Common baud rate auto-negotiation: 9600, 19200, 38400, 57600, 115200 bps Includes development resources and manual with examples for Raspberry Pi, Arduino, and STM32 NB-IoT/Cat-M/2G Band support: NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66, B71, B85 Cat-M: B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B27, B28, B66, B85 GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz Data rate: NB-IoT: 136 Kbps (DL) / 150 Kbps (UL) Cat-M: 589 Kbps (DL) / 1119 Kbps (UL) GPRS: 85.6 Kbps (DL) / 85.6 Kbps (UL) EDGE: 236.8 Kbps (DL) / 236.8 Kbps (UL) SIM card support for NB-IoT, Cat-M, 2G card (1.8V SIM card only) Applicable region: global GNSS satellite systems: GPS, BeiDou, GLONASS, Galileo Receiver type: 16-channel C/A Code Band frequencies: GPS L1: 1575.42 ± 1.023 MHz GLONASS L1: 1598.0625 to 1605.375 MHz BDS B1: 1559.052 to 1591.788 MHz Galileo L1: 1575.42 ± 1.023 MHz Data format: NMEA-0183 Antenna: Active antenna Power supply: 5V Operating voltage: 5V / 3.3V (configured via 0Ω resistor) Current consumption: approximately 41 mA (idle mode) Operating temperature: -40°C to 85°C Storage temperature: -45°C to 90°C